KOREKOTE EPOXY COATINGS
Better for the environment. Better for business.
extra strong
40ML
—Coating—
(2 Coats)
Easy one-coat application
Surface Ready
12 hours
At a temp of 70° F
Fully Cured
24-48 hours
At a temp of 70° F
Maximum
Bond
Strength
Strength
Self Leveling
Mildew Inhibiting
Ultra LOW VOCs
AND no foul odors
UV Resistance
Coatings Coverage Guide
1 unit (3 gallons) of parts A/B mixed covers a max of 300 sq./ft.
KreteKote
EPOXY Floor
Coating System
Coating System
- Eliminates hot tire peel
- Extra strong 20ml coating
- maximum bond strength
- Ultra Low VOCs or foul odors
- Self leveling for easier application
- Low environmental impact
- Non-permeable surface
- Fully cured 24-48 hours ( at 70°F)
- Easier to apply / clean up than paint
- Mildew inhibiting
RECOMMENDED SUBSTRATES:
Concrete, Stone, Masonry, Steel, Wood
ARMORKOTE
Pool & Marine Epoxy
Coating System
Coating System
- America’s preferred pool surface coating
- UV stable
- Outstanding chlorine and chemical barrier
- Extra strong 20ml coating
- maximum bond strength
- Ultra Low VOCs or foul odors
- Mildew inhibiting
- Self leveling for easier application
- Low environmental impact
- Non-permeable surface
- Fully cured 24-48 hours ( at 70°F)
- Easier to apply / clean up than paint
RECOMMENDED SUBSTRATES:
Marcite, Gunite, Concrete, Fiberglass,
Marble, Acrylic,
Marble, Acrylic,
SMARTKOTE
Moisture Block
Coating System
Coating System
- Green Seal™ Certified moisture
resistant coating
- Coat and seal: pools, basements, tanks and decks
- Outstanding chlorine and chemical barrier
- UV stable
- Extra strong 20ml coating
- Maximum bond strength
- Ultra Low VOCs and no foul odors
- Self leveling for easier application
- Low environmental impact
- Fully cured 24-48 hours ( at 70°F)
- Easier to apply / clean up than paint
resistant coating
This product meets Green Seal™ Standard GS-11 based on effective performance, minimized/recycled packaging, and protective limits on VOCs and human toxicity. GreenSeal.org.
RECOMMENDED SUBSTRATES:
Marcite, Gunite, Concrete, Fiberglass, Concrete, Stone, Masonry, Steel, Wood
Marble, Acrylic
Marble, Acrylic
VaultKote
BASEMENT EPOXY
Coating System
Coating System
- Reduces radon gas levels up to 50%
- R4 insulation rating
- 14,000 psi hydrostatic pressure*
- Ultra Low VOCs or foul odors
- Extra strong 20ml coating
- maximum bond strength
- Mildew inhibiting
- Self leveling for easier application
- Low environmental impact
- Non-permeable surface
- Fully cured 24-48 hours ( at 70°F)
- Easier to apply / clean up than paint
*14,000 PSI HYDROSTATIC PRESSURE—When applied in combination with KoreKote BASEKOTE.
RECOMMENDED SUBSTRATES:
Concrete, Stone, Masonry, Steel, Wood
ShieldKote
General Purpose Epoxy
Coating System
Coating System
- UV stable
- All-purpose coating and sealer
- Extra strong 10ml coating
- maximum bond strength
- Ultra Low VOCs or foul odors
- Mildew inhibiting
- Self leveling for easier application
- Low environmental impact
- Non-permeable surface
- Fully cured 24-48 hours ( at 70°F)
- Easier to apply / clean up than paint
RECOMMENDED SUBSTRATES:
Concrete, Stone, Masonry, Steel, Stainless Steel, Wood Decking, Plywood, Pressboard, Slatboard
Have a special coating project?
We can customize a solution
PRIMER & FILLERS
Simple surface preparation is critical for maximum bond!
BASEKOTE
Primer Epoxy
coating System
coating System
- Primer layer coat for concrete & steel
- Strengthens concrete substrate
- Protects steel substrate from rust
- Hydrostatic pressure barrier
- Cures in damp environments
- maximum bond strength
- Ultra Low VOCs or foul odors
- Mildew inhibiting
- Self leveling for easier application
- Low environmental impact
- Fully cured 8 hours ( at 70°F)
RECOMMENDED SUBSTRATES:
Concrete, Stone, Masonry, Steel, Stainless Steel, Wood Decking, Plywood, Pressboard, Slatboard
BONDKOTE
Mastic & Filler Epoxy
coating System
coating System
Looking for 100% bonding strength and a material that will cure in almost any environment? With its low/no VOCs you can breathe a little easier as you fill those tough holes and divots. When it comes to a bonding filler, nothing is as effective or environmentally friendly as BondKote.
- All-purpose filler, grout & bond agent
- Cures in damp environments
- Maximum bond strength
- Ultra Low VOCs or foul odors
- Low environmental impact
- Fully cured 48 hours (at 70°F)
RECOMMENDED SUBSTRATES:
Concrete, Stone, Masonry, Steel, Stainless Steel Wood Decking, Plywood, Pressboard, Slatboard Plastic: ABS, PVC, Polycarbonate
Surface Cleaner
Assures longer lasting
& more durable finish.
& more durable finish.
It’s critical to properly clean your surface. Before applying KoreKote products always make sure your surface is clean, dry and dust free. This assures a stronger bond and a longer lasting more durable finish.
- Dry powder/No fumes
- Activates only when spread on the wet surfaces
- No acid fumes that can cause lung damage
- Does not leave any gel film that can cause delaminating of applied material
- Etches concrete when allowed to sit on wet surfaces for 20 min
- Improves epoxy bonding performance
- Cleans concrete, stone, wood, masonry, metal
- Does not leave acid residue
- Will not leave thin blush film
SURFACE ADDITIVES
Add a little personality to your epoxy coating
ColorChips
decorative
vinyl color chips
vinyl color chips
- Colors to match any décor
- Non-flammable
- Optimal flexibility and strength
- Colorfast, UV stable pigments
- Hides sub-surface imperfections
- Easy to apply
- Sound/noise deadening qualities
- Sustainable and safe
AntiSkid
Add texture, finish
and safety
and safety